Receptacle Tools

Receptacle insertion tools, receptacle removal kits and tungsten carbide drill bits

Receptacle Insertion Tools (RIT) are for inserting the receptacle into the hole without damage. In some ranges an adjustable tool is available which can be set to the required mounting height by use of a locking allen screw. The height required can either be set using a spare receptacle or by setting up the tool on an adjacent installed receptacle.

Receptacle Insertion

Series
Test Centre
Mounting Height
Part No. * adjustable
RA0C
0.76mm
Flush
TA0R
LRC1
1.27mm
Flush to 7.24mm (0.285″)
TC1A*
RA1
(0.050″)
Flush
TA1
RA2 / LRA2
2mm (0.075″)
Flush
TA2
RA2
2mm
Flush to 3.18mm (0.125″)
TA2A*
LRA2
2mm
Flush to 5.59mm (0.220″)
TA2A*
RA3
2.54mm
Flush to 4.75mm (0.187″)
TA4A*
RA3 , RA4
(0.1″)
Flush
TA3
RA4
Flush to 5.59mm (0.0220″)
TA4A*
RA5
3.18mm
Flush
TA5
RA6
4.75mm
Flush
TA6
RA7
(0.187″)
Flush
TA7
RC1
2.54mm
0.127mm (0.005″)
TC1
View Receptacle Insertion Tools Range

For the removal of A.T.E. receptacles which are either worn or broken. Three kits are available to make a once difficult job very easy. A separate kit is required for each standard test centre spacing. Each kit contains a tool to initially set the receptacle flush and another tool to punch the receptacle all the way through the hole. Standard Coda-Pin receptacle insertion tools are required to install the new receptacle.

Receptacle Removal Kits

Test Centre
Receptacle Series
Part No.
0.1″ (2.54mm)
RA4
RRTRA4
0.075″ (1.91mm)
LRA2
RRTLRA2
0.050″ (1.27mm)
LRC1
RRTLRC1
View Receptacle Removal Kits Range

Ideal for drilling holes for receptacle or probe installation. Suitable for most materials the standard flute length is 10mm. A few of the sizes have an option of longer flute length for thicker probe plate material.

Tungsten carbide drill bits

Series
Flute Diameter (mm)
Flute Length (mm)
Drill Part No.
PA0
0.55
7.0
DA0
RA0C/RM4C
0.70
7.0<
DA0R
RA1
0.90
9.8
DA1
RA2, LRA2
1.40
10.5
DA2
RA3, RA4, RC1
1.70
10.5
DA3
RA3, RA4, RC1
1.75
10.5
DA3A
PA5, PD7
2.40
10.5
DA5
RA6
2.75
10.5
DA6
RA7
3.60
12.3
DA7
LRC1
0.97
9.8
DRC1
RS3, RD1
2.00
10.5
DS3
RS6, RC8
3.00
10.5
DS6
IPP1
1.45
10.5
DI3
IPG1 / IPZ1 / IPF1
1.40
10.5
DI1
IPP2
2.15
10.5
DI2
RD3
3.50
12.3
DD3
PE3
6.40
12.3
DE3
RC4
5.60
12.3
DC4
LRC1
0.95
16.0
DRC1L
LRA2
1.40
16.0
DA2L
RA4
1.70
16.0
DA3L
Shank =3.175mm (3/8″) OAL = 38mm
View Tungsten Carbide Drill Bits Range