The LPA2 Series is the universal size for use at 1.91mm test centres in the majority of ATE test fixtures. It has a very wide range of tip styles for almost all test targets. Additionally, a wide choice of spring forces is available. The ST-LPA2 series adds hardened steel tips which ensure an exceptional resistance to wear in high volume PCB production runs. The LF-LPA2 series has hardened tips, extra resilient plated surfaces and an enhanced pre-loaded spring pressure to enable good penetration of the tough residual contamination often found on the surface of many lead-free solders.
Test Probe Specification
|Spring force||at wkg travel|
|‘S’ Light spring||114g (4.0oz)|
|‘X’ Heavy spring||170g (6.0oz)|
|‘U’ Ultra heavy spring||227g (8.0oz)|
|Current rating DC (maximum continuous)||6 amps|
|Minimum test centres||1.91mm (.075″)|
|Temperature range||-55’C – + 150’C|
Mounting hole size: 1.35/1.4mm.
1.4mm drill is most commonly used:
Drill part no. DA2. RIT tool part no. TA2,TA2A
For pricing, availability or to place an order, click on a part no. below.
See receptacles and tools at bottom of page.