LPA2MX
The LPA2 Series is the universal size for use at 1.91mm test centres in the majority of ATE test fixtures. It has a very wide range of tip styles for almost all test targets. Additionally, a wide choice of spring forces is available. The ST-LPA2 series adds hardened steel tips which ensure an exceptional resistance to wear in high volume PCB production runs. The LF-LPA2 series has hardened tips, extra resilient plated surfaces and an enhanced pre-loaded spring pressure to enable good penetration of the tough residual contamination often found on the surface of many lead-free solders. 1.91mm / 0.075" test centres
Qty | Price Each (£ GBP, EX VAT) |
---|---|
1 - 49 | 2.44 |
50 - 99 | 1.74 |
100 - 249 | 1.53 |
250 - 499 | 1.36 |
500 - 999 | 1.22 |
1000 - 2999 | 1.11 |
Available Stock :
42
Lead time for additional qty approximately: 12 days
Single Item Price from: £2.44
Test Probe Specification
Full travel |
6.35mm (.250″)
|
Working travel |
4.24mm (.167″)
|
Spring force | at wkg travel |
‘S’ Light spring | 114g (4.0oz) |
‘X’ Heavy spring | 170g (6.0oz) |
‘U’ Ultra heavy spring | 227g (8.0oz) |
Current rating DC (maximum continuous) | 6 amps |
Minimum test centres | 1.91mm (.075″) |
Temperature range | -55’C – + 150’C |
Receptacle Specification
Mounting hole size: 1.35/1.4mm.
1.4mm drill is most commonly used:
How To Use
Product Selection
Fitment & Usage
After Care