SWIFT-DOCK-6-L (land side)

SWIFT-DOCK-6-L

This is the contact land side of our six pin, spring loaded interface array without PCB They are ideal for data and power transfer between handheld devices and docking stations. Instead of spending a lot of time designing your own bespoke interface, Swift-Dock can be integrated into the design of a handheld device and docking station. The contact land side, which is usually utilized in the handset is paired with the spring contact side which is used in the docking station. Quotations available for quantities greater than 20000; please contact us.
Qty Price Each (£ GBP, EX VAT)
1 - 49 5.50
50 - 99 5.50
100 - 249 4.88
250 - 499 4.88
500 - 999 4.88
1000 - 2999 3.34
3000 - 4999 3.34
5000 - 9999 3.24
10000 - 20000 2.39
Available Stock : 37

Lead time for additional qty approximately: 14 days

Single Item Price from: £5.50

 

Spring Contact and Land Specification

No. of contacts
6
Maximum travel
2.65mm
Recommended travel (Max)
1.75mm
Recommended travel (Min)
1.35mm
Spring force at recommended travel (Max)
720g (6 pins)
Current rating DC (max)
10 amps DC cont; per pin.
Material; spring contact & land
Gold plated brass
Operating temperature range
-40 – to +150’C

 

Moulding Specification

Material
Polyamide PA66
Colour
Black. Other colours available for volume qtys
Fitment screw hole size
2.5mm
Sealing gasket part no.
SD6G
UL rating
UL94V-2. By request UL94V-0
IP rating
IP50, IP55 with gasket. Land connector IP67 with rear sealing

 

Connection specification

Cable type for solder connection:
Equipment wire, multi-strand suitable for 6 amps DC; 16/0.2 for 3 amp DC or 7/0.25 – 1 amp and data DC
If using with SD-Power spring contact side
Flexible mult-istrand cable suitable for 10 amps continuous load current. Please note: Allow sufficient cable length for tail movement on the spring contact side to prevent fracturing at the solder point. Shrink sleeving may be required