LPA2TU
The LPA2 Series is the universal size for use at 1.91mm test centres in the majority of ATE test fixtures. It has a very wide range of tip styles for almost all test targets. Additionally, a wide choice of spring forces is available. The ST-LPA2 series adds hardened steel tips which ensure an exceptional resistance to wear in high volume PCB production runs. The LF-LPA2 series has hardened tips, extra resilient plated surfaces and an enhanced pre-loaded spring pressure to enable good penetration of the tough residual contamination often found on the surface of many lead-free solders. 1.91mm / 0.075" test centres
| Qty | Price Each (£ GBP, EX VAT) |
|---|---|
| 1 - 49 | 2.44 |
| 50 - 99 | 1.74 |
| 100 - 249 | 1.53 |
| 250 - 499 | 1.36 |
| 500 - 999 | 1.22 |
| 1000 - 2999 | 1.11 |
Available Stock :
0
Lead time for additional qty approximately: 12 days
Single Item Price from: £2.44
Test Probe Specification
| Full travel |
6.35mm (.250″)
|
| Working travel |
4.24mm (.167″)
|
| Spring force | at wkg travel |
| ‘S’ Light spring | 114g (4.0oz) |
| ‘X’ Heavy spring | 170g (6.0oz) |
| ‘U’ Ultra heavy spring | 227g (8.0oz) |
| Current rating DC (maximum continuous) | 6 amps |
| Minimum test centres | 1.91mm (.075″) |
| Temperature range | -55’C – + 150’C |
Receptacle Specification
Mounting hole size: 1.35/1.4mm.
1.4mm drill is most commonly used:
How To Use
Product Selection
Fitment & Usage
After Care
Related Products
Receptacle - Wire Wrap
LRA2W10
Receptacle - Wire Wrap
LRA2WL
Receptacle - Wire Wrap
LRA2WLL
Receptacle - Round Pin
LRA2R
Receptacle - Solder Cup
LRA2S
Receptacle - Wire-Wrap
LRA2W
Receptacle - Crimp
LRA2C
Receptacle - 1mm Round Pin
