The PE6 series is a range of superior performance RF coaxial test probes designed to allow an instrumentation-quality interface for broadband RF measurements up to 4GHz. Accurate small signal and RF power (up to 50w) measurements make them ideal for cellular telephone testing applications.
| Impedance |
50 Ohms
|
| Working travel (except PE6KH & KB) |
4.24mm (.167″)
|
| Spring force at working travel | |
|
Each probe (3)
|
143g (5.2oz)
|
| Current rating DC cont (max) |
3 Amps
|
| Maximum Frequency |
4 GHz
|
| VSWR |
1.15:1@1GHz, 1.11:1 typical
|
| Ins loss |
0.12db@1Ghz
|
| Minimum return loss |
0.12db, 26db typical
|
| Required tail connector |
SMA plug
|
The PE8 coaxial probe is designed to make contact with SMB plugs which are often fitted to PCBs. This will remove the requirement for sacrificial plugs.
| Impedance |
50 Ohms
|
| Working travel |
4mm
|
| Spring force at working travel |
530g
|
| Maximum Frequency (3db c/o) |
2 GHz
|
| Required tail connector |
MCX plug
|
Mounting hole size without receptacle: 4.5mm
Mounting hole size with receptacle: see each receptacle type
For SMA sockets.
The PE3 series are coaxial probes designed to make a spring loaded connection to SMA sockets. This substitutes the need for sacrificial plugs and sockets.
| Impedance |
50 Ohms
|
|
| Working travel |
4.24mm (.167″)
|
|
| Spring force at working travel |
–
|
|
| Outer shield |
57g (2.0oz)
|
|
| Inner contact |
113g (4.0oz)
|
|
| Current rating DC cont (max) |
3 Amps
|
|
| Maximum Frequency (3db c/o) |
2.5 GHz
|
|
| YSWR |
1.15:1@1GHz
|
|
| Ins loss |
0.13db@1Ghz
|
|
| Required tail connector |
SMB plug
|
|
Mounting Hole Size: 6.35mm/6.40mm Drill Part No: DE3
