A range of spring loaded contacts whose fitment method is from behind the plastic moulding or housing.
A collar is found at the back end of the spring contact. This acts as a stop enabling the spring contact to be mounted at a set position. A barb is often used midway down the barrel to permanently hold the spring contact in position once fitted.
The movie shows a typical installation using the PD10JS spring contact and the IPP2S contact land.
Our smallest spring contact series in the back fitment section, with a minimum center spacing of just 2.2mm.
For use in low power, battery charging applications including:
| Working travel |
0.8mm
|
| Spring force at wkg travel |
45g
|
| Current rating DC cont |
1 Amp
|
| Minimum centre spacing |
2.2mm
|
| Connection method |
Solder tail direct to PCB, or to flexi-circuit
or solder wire onto end |
| Fitment hole size |
1.60 – 1.62mm
|
| Pad diameter |
>2mm
|
| Panel thickness |
3mm, back fitment
|
A miniature, low profile spring contact similar to PC5. For through-hole fitment.
| Full travel |
1.57mm
|
|
| Working travel |
1.00mm
|
|
| Spring force at wkg travel |
128g
|
|
| Current rating DC cont |
5 Amps
|
|
| Minimum centre spacing |
2.54mm (with care)
|
|
| Connection method |
solder tail to PCB/Flexi or wires
|
|
| Mounting hole size for body |
1.5mm
|
|
A medium-sized, low profile spring contact for through-hole fitment.
| Full travel |
1.8mm
|
|
| Working travel |
1.5mm
|
|
| Spring force at wkg travel |
110g
|
|
| Current rating DC cont |
1 Amp
|
|
| Minimum centre spacing |
4mm
|
|
| Connection method |
solder into PCB
|
|
| Mounting hole size |
1.6mm (PCB)
|
|
A low profile, miniature spring contact, ideally suited for use in battery charging units for camcorders, cellular telephone, 2 way radios and more general interface applications where available space is minimal.
| Full travel |
1.91mm
|
|
| Working travel |
1.27mm
|
|
| Spring force at wkg travel |
99g
|
|
| Current rating DC cont |
3 Amps
|
|
| Minimum centre spacing |
3.81mm
|
|
| Connection method |
solder into PCB
|
|
| Mounting hole size |
1.70mm
|
|
A slightly larger battery contact for applications similar to the PC5 series such as in battery charging units for camcorders, cellular telephone, 2 way radios and more general interface applications where available space is minimal. It has a bullet nose tip style and a choice of spring pressures.
| Full travel |
2.54mm
|
|
| Working travel |
1.52mm
|
|
| Spring force |
initial
|
at wkg travel
|
|
Light spring
|
12g
|
32g
|
|
Heavy spring
|
32g
|
85g
|
| Current rating DC |
3 Amps
|
|
| Minimum centre spacing |
3.18mm
|
|
| Connection method |
PCB fitment
|
|
| Mounting hole size (tail) |
1.12mm minimum
|
|
A low profile, medium sized spring contact, ideal for more robust applications. Available in light and heavy spring pressures. Suitable for soldering.
| Full travel |
2.6mm
|
| Working travel |
1.7mm
|
| Spring force |
at wkg travel
|
|
Light spring
|
114g
|
|
Heavy spring
|
250g
|
| Current rating DC |
1 Amp cont
|
| Minimum centre spacing |
5.08mm
|
| Connection method |
Solder to PCB
|
| Mounting hole size (tail) |
2.05 – 2.1mm
|
A low profile, large-sized spring contact, ideal for robust applications. Available in four different spring pressures. This design features a barb fitment for retention in a moulding.
| Full travel |
2.15mm
|
| Working travel |
1.3mm
|
| Spring force at wkg travel | |
| 23g | |
| 57g | |
| 128g | |
| 156g | |
| Current rating DC cont |
1 Amp
|
| Minimum centre spacing |
6.00mm
|
| Connection method |
Solder into PCB hole
or solder wire onto end |
| Mounting hole size (body) |
3.5mm
|
A high current version of our PD10JE spring contact. Its through-pin construction allows it to handle loads up to 8 amps.
| Full travel |
2.15mm
|
| Working travel |
1.25mm
|
| Spring force at wkg travel |
300g +/- 25%
|
| Current rating DC cont |
8 amps connected to tail
|
| Minimum centre spacing |
6mm
|
| Connection method |
Solder wire onto tail
|
| Mounting hole size |
3.5mm
|
A low profile, medium-sized spring contact, ideal for robust applications. This design features a barb fitment for retention in a moulding.
| Full travel |
3.5mm
|
| Working travel |
2.75mm
|
| Spring force at wkg travel |
56g
|
| Current rating DC cont |
1 Amp
|
| Minimum centre spacing |
6.7mm
|
| Connection method |
Solder into PCB hole
or solder wire onto end |
| Mounting hole size |
4.1mm
|
A low profile, medium-sized series of two spring contacts with either a tail for PCB connection or solderpot for direct wire connection. Ideal for robust applications. Has a current rating of 6 amps. This design features a barb fitment for retention in a plastic moulding or housing.
| Full travel |
2.65mm
|
| Working travel |
2.05mm
|
| Spring force at wkg travel |
120g (200g for PD11JXT-SP)
|
| Current rating DC cont |
6 amps
|
| Minimum centre spacing |
6.7mm
|
| Connection method |
Solder into PCB hole
or solder wire onto solderpot |
| Mounting hole size |
4.1mm
|
A high current version of our PD11JST-SP spring contact. It's through-pin construction allows it to handle loads up to 10 amps.
| Full travel |
2.55mm
|
| Working travel |
2.05mm
|
| Spring force at wkg travel |
170g +/- 20%
|
| Current rating 12V DC cont |
10 Amp connected to tail
|
| Minimum centre spacing |
6.7mm
|
| Connection method |
Solder wire into solder pot
or solder wire onto end |
| Mounting hole size |
4.1mm
|
A long travel version of our high current HD-PD11JXT-SP spring contact. Its through-pin construction allows it to handle loads up to 10 amps. This product has slightly longer travel and the option to solder the back of the body into a PCB, still using the tail cable connection.
| Full travel |
4mm
|
| Working travel |
3 – 3.5mm
|
| Spring force at wkg travel |
170g +/- 20%
|
| Current rating 12V DC cont max continuous |
10 Amp connected to tail
|
| Minimum centre spacing |
6.7mm
|
| Connection method |
Solder wire into solder pot
or solder spring contact barrel into PCB, link tail to PCB |
| Mounting hole size |
4.1mm
|
A low profile, small sized spring contact with solderpot tail for direct wire or PCB connection. Ideal for robust applications. Available in light and heavy spring variants. Has a current rating of 1 and 2 amps respectively. Features a barb for retention in a plastic moulding.
| Full travel |
2.65mm
|
|
| Working travel |
2.05mm
|
|
| Spring force at wkg travel |
PD14JLT-SP 45g
|
PD14JST-SP 100g
|
| Current rating DC cont |
Quiescent 1 amp Active 0.5 amp
|
Q. 2 amp Active 1 amp
|
| Minimum centre spacing |
3mm
|
|
| Connection method |
Solder into PCB hole
or solder wire onto end |
|
| Mounting hole size (body) |
2mm
|
|
| Durability |
100 000 cycles
|
A low profile, small sized spring contact with solder-pot tail for direct wire or PCB connection. Ideal for robust applications. Has a current rating of 5 amps maximum. Features a barb for retention in a plastic moulding.
| Full travel |
2.65mm
|
| Working travel |
2.05mm
|
| Spring force at wkg travel |
100g
|
| Current rating DC cont |
Quiescent 5 amp Active 2 amp
|
| Minimum centre spacing |
3mm
|
| Connection method |
Solder into PCB hole
or solder wire onto end |
| Mounting hole size (body) |
2mm
|
| Durability |
100 000 cycles
|
A low profile, large sized spring contact with solderpot tail for direct wire or PCB connection. Ideal for robust applications. Available in light and heavy spring variants. Has a current rating of 8 amps. Features a barb for retention in a plastic moulding.
| Full travel |
2.65mm
|
|
| Working travel |
2.05mm
|
|
| Spring force at wkg travel |
PD16JST-SP 200g
|
PD16JXT-SP 325g
|
| Current rating DC cont (Quiescent) |
8 amps
|
12 amps
|
| Current rating DC cont (Active) |
4 amps
|
6 amps
|
| Minimum centre spacing |
10mm
|
|
| Connection method |
Solder into PCB hole
or solder wire onto end |
|
| Mounting hole size (body) |
6mm
|
|
| Durability |
100 000 cycles (min)
|
