SWIFT-DOCK-6P-L
This is the contact land side of our six pin, spring loaded interface array.
They are ideal for data and power transfer between handheld devices and docking stations.
Instead of spending a lot of time designing your own bespoke interface, Swift-Dock can be integrated into the design of a handheld device and docking station.
The contact land side, which is usually utilized in the handset is paired with the spring contact side which is used in the docking station. The PCB is supplied without a connector.
Quotations available for quantities greater than 20000; please contact us.
Qty | Price Each (£ GBP, EX VAT) |
---|---|
1 - 49 | 6.28 |
50 - 99 | 6.28 |
100 - 249 | 5.23 |
250 - 499 | 5.23 |
500 - 999 | 5.23 |
1000 - 9999 | 4.55 |
10000 - 20000 | 3.52 |
Available Stock :
144
Lead time for additional qty approximately: 14 days
Single Item Price from: £6.28
Spring Contact and Land Specification
No. of contacts |
6
|
Maximum travel |
2.65mm
|
Recommended travel (Max) |
1.75mm
|
Recommended travel (Min) |
1.35mm
|
Spring force at recommended travel (Max) |
720g (6 pins)
|
Current rating DC (max) |
3 amps DC cont; per pin.
|
Material; spring contact & land |
Gold plated brass
|
Operating temperature range |
-40 – to +150’C
|
Moulding Specification
Material |
Polyamide PA66
|
Colour |
Black. Other colours available for volume qtys
|
Fitment screw hole size |
2.5mm
|
Sealing gasket part no. |
SD6G
|
UL rating |
UL94V-2. By request UL94V-0
|
IP rating |
IP50, IP55 with gasket. Land connector IP67 with rear sealing
|
Connection specification
Cable type for solder connection: |
Equipment wire, multi-strand suitable for 6 amps DC; 16/0.2 for 3 amp DC or 7/0.25 – 1 amp and data DC
|
If using with SD-Power spring contact side |
Flexible mult-istrand cable suitable for 10 amps continuous load current. Please note: Allow sufficient cable length for tail movement on the spring contact side to prevent fracturing at the solder point. Shrink sleeving may be required
|