SWIFT-DOCK-2-L Land side


This is the contact land side only of our two pin, spring loaded interface array with no PCB They are ideal for power transfer between handheld devices and docking stations. Instead of spending a lot of time designing your own bespoke interface, Swift-Dock can be integrated into the design of a handheld device and docking station. The contact land side, which is usually in the handset is paired with the spring contact side which is used in the docking station. Quotations available for quantities greater than 10 000. Please contact us.
Qty Price Each (£ GBP, EX VAT)
1 - 49 3.10
50 - 99 3.10
100 - 249 2.62
250 - 499 2.62
500 - 999 2.62
1000 - 2999 1.94
3000 - 4999 1.94
5000 - 9999 1.67
10000 - 19999 1.10
Available Stock : 1168

Lead time for additional qty approximately: 30 days

Single Item Price from: £3.10


Spring Contact and Land Specification

No. of contacts
Maximum travel
Recommended travel (Max)
Recommended travel (Min)
Spring force at recommended travel (Max)
240g (2 pins)
Current rating DC (max); per pin
10 amps DC cont.
Material; spring contact & land
Gold plated brass
Operating temperature range
-40 – to +150’C


Moulding Specification

Black. Other colours available for volume qtys
Fitment screw hole size
Sealing gasket part no.
UL rating
UL94V-2. By request UL94V-0
IP rating
IP50, IP55 with gasket. Land connector IP67 with rear sealing


Connection specification

Cable type for solder connection:
Equipment wire, multi-strand suitable for 6 amps DC; 16/0.2 for 3 amp DC or 7/0.25 – 1 amp and data DC
If using with SD-Power spring contact side
Flexible mult-istrand cable suitable for 10 amps continuous load current. Please note: Allow sufficient cable length for tail movement on the spring contact side to prevent fracturing at the solder point. Shrink sleeving may be required