PM2B-W33
Lead time for additional qty approximately: 20 days
| Full travel |
2.00mm
|
| Working travel |
1.33mm
|
| Spring force |
at wkg travel
|
|
48g
|
|
| Current rating DC (max) |
2 Amps
|
| Minimum test centres |
0.51mm
|
| Drill hole size |
0.34 – 0.36mm
|
Installation
The non-replaceable microprobes feature a collar at the top of the barrel, which is used as a stop in the fitment process. Due to the minute barrel diameters and thin walls, it is imperative that the drilled hole diameter (0.34mm – 0.36mm) and straightness are very accurate. We recommend that the pre-wired option is taken as connecting a cable to these probes is an extremely delicate operation.
Usually, multi-plate fixtures containing no less than 3 plates, are used to retain large multiples of probes.
Otherwise a block of stable material which will allow reliable drilled holes is to be recommended, with the microprobe fitted wire/tail first with tweezers, with a small amount of locking compound on the side to secure it, if required.