PA4JL-064
2.54mm / 0.10" test centres. Plain radius tip-style.
The PA4 Series is the universal size for use at 2.54mm test centres in the majority of ATE test fixtures. It has a very wide range of tip styles for almost all test targets. Additionally, a wide choice of spring forces is available. The ST-PA4 series adds hardened steel tips which ensure an exceptional resistance to wear in high volume PCB production runs. The LF-PA4 series has hardened tips, extra resilient plated surfaces and an enhanced pre-loaded spring pressure to enable good penetration of the tough residual contamination often found on the surface of many lead-free solders.
The PA4 Series is the universal size for use at 2.54mm test centres in the majority of ATE test fixtures. It has a very wide range of tip styles for almost all test targets. Additionally, a wide choice of spring forces is available. The ST-PA4 series adds hardened steel tips which ensure an exceptional resistance to wear in high volume PCB production runs. The LF-PA4 series has hardened tips, extra resilient plated surfaces and an enhanced pre-loaded spring pressure to enable good penetration of the tough residual contamination often found on the surface of many lead-free solders.
| Qty | Price Each (£ GBP, EX VAT) |
|---|---|
| 1 - 49 | 0.95 |
| 50 - 99 | 0.68 |
| 100 - 249 | 0.59 |
| 250 - 499 | 0.53 |
| 500 - 29999 | 0.49 |
Available Stock :
4
Lead time for additional qty approximately: 12 days
Single Item Price from: £0.95
Test Probe Specification
| Full travel |
6.35mm (.250″)
|
| Working travel |
4.24mm (.167″)
|
| Spring force |
at wkg travel
|
|
‘L’ Light spring
|
57g (2.0oz)
|
|
114g (4.0oz)
|
|
|
‘X’ Heavy spring
|
170g (6.0oz)
|
|
‘U’ Ultra heavy spring
|
283g (10.0oz)
|
| Current rating DC (maximum continuous) |
8 amps max. unless shown otherwise in extra spec tab
|
| Operating temperature |
-55’C – +150’C (or shown with tip style if different)
|
| Minimum test centres (apart from large heads) |
2.54mm (.100″)
|
Receptacle Specification
Mounting hole size: 1.70mm softer material/1.75mm harder material.
1.75mm drill is most commonly used:
1.70mm holes, drill part no. DA3. 1.75mm holes, drill part no. DA3A.
Receptacle insertion tool part nos. TA3, TA4A
How To Use
Product Selection (PDF)
Watch our YouTube video about test probe and receptacle selection
Fitment & Usage (PDF)
After Care (PDF)
Related Products
Receptacle - Wire Wrap
RA4WLLL
Receptacle - Wire Wrap
RA4WLL
Receptacle - Wire wrap
RA4W3
Receptacle - Wire Wrap
RA4W12
Receptacle - Wire Wrap
RA4W
Receptacle - Solder Cup
RA4S
Receptacle - 0.64mm Round Pin
RA4R
Receptacle - 1.0mm Round Pin
RA4R-040
Receptacle - Crimp
