PA4RX Heavy Spring

PA4RX

The PA4 Series is the universal size for use at 2.54mm test centres in the majority of ATE test fixtures. It has a very wide range of tip styles for almost all test targets. Additionally, a wide choice of spring forces is available. The ST-PA4 series adds hardened steel tips which ensure an exceptional resistance to wear in high volume PCB production runs. The LF-PA4 series has hardened tips, extra resilient plated surfaces and an enhanced pre-loaded spring pressure to enable good penetration of the tough residual contamination often found on the surface of many lead-free solders.
Qty Price Each (£ GBP, EX VAT)
1 - 49 0.95
50 - 99 0.68
100 - 249 0.59
250 - 499 0.53
500 - 19999 0.46
Available Stock : 60

Lead time for additional qty approximately: 12 days

Single Item Price from: £0.95

Test Probe Specification

Full travel
6.35mm (.250″)
Working travel
4.24mm (.167″)
Spring force
at wkg travel
‘L’ Extra light spring
57g (2.0oz)
‘S’ Light spring
114g (4.0oz)
‘X’ Heavy spring
170g (6.0oz)
‘E’ Extra heavy
227g (8.0oz)
‘U’ Ultra heavy spring
283g (10.0oz)
Current rating DC (maximum continuous)
8 amps unless otherwise shown in extra specifications tab
Minimum test centres (except for large heads)
2.54mm (.100″)
Temperature range
-55’C – +150’C (except where shown on certain products)

Receptacle Specification

Mounting hole size: 1.70mm softer material/1.75mm harder material.


1.70mm holes, drill part no. DA3

1.75mm holes, drill part no.DA3A

How To Use

Product Selection
Fitment & Usage
After Care