ST-LPC1TS-020
The LPC1 Series is the universal size for use at 1.27mm test centres in the majority of ATE test fixtures. It has a very wide range of tip styles for almost all test targets. Additionally, a wide choice of spring forces is available. The ST-LPC1 series adds hardened steel tips which ensure an exceptional resistance to wear in high volume PCB production runs. The LF-LPC1 series has hardened tips, extra resilient plated surfaces and an enhanced pre-loaded spring pressure to enable good penetration of the tough residual contamination often found on the surface of many lead-free solders.
Qty | Price Each (£ GBP, EX VAT) |
---|---|
1 - 49 | 3.00 |
50 - 99 | 2.14 |
100 - 249 | 1.88 |
250 - 499 | 1.67 |
500 - 999 | 1.50 |
1000 - 2999 | 1.36 |
3000 - 4999 | 1.25 |
5000 - 9999 | 1.15 |
10000 - 19999 | 1.07 |
Available Stock :
0
Lead time for additional qty approximately: 12 days
Single Item Price from: £3.00
Test Probe Specification
Full travel | 6.35mm (.250″) |
Working travel | 4.24mm (.167″) |
Spring force | at wkg travel |
‘S’ Light spring | 114g (4.0oz) |
‘X’ Heavy spring | 170g (6.0oz) |
‘U’ Ultra heavy spring | 227g (8oz) |
Minimum test centres | 1.27mm (.050″) |
Temperature range | -55’C to +150’C |
Receptacle Specifications
Mounting hole size: 0.97/0.99mm.
0.95mm drill is most commonly used:
How To Use
Product Selection (PDF)
Watch our YouTube video about test probe and receptacle selection
Fitment & Usage (PDF)
After Care (PDF)